对单扇门来说,通常采用一般性设计,满足基本功能即可;而对多扇门来说,就要考虑门之间的连接:必须满足基本的开关功能,其次要保证通常条件下的便利操作,再次就是具备密封防水性能。工地集装箱厂家。

For a single door, a general design is usually adopted to meet basic functions; For multiple doors, it is necessary to consider the connection between the doors: first, basic opening and closing functions must be met, second, convenient operation under normal conditions must be ensured, and third, sealing and waterproof performance must be achieved. Construction site container manufacturer.

单扇门通常采用标准箱门的结构形式,包括内外门胶条,只要具有密封功能就能满足要求。单扇门可采用端面密封胶条,这样有助于门的开关,特别是从内部打开的门,端面密封更有助于实现轻松操作,内胶条可通用一切形状。

A single door usually adopts the structural form of a standard box door, including inner and outer door rubber strips. As long as it has a sealing function, it can meet the requirements. A single door can use end sealing strips, which help with the opening and closing of the door, especially for doors that open from the inside. The end sealing is more conducive to easy operation, and the inner sealing strip can be used in all shapes.

对于多扇门的连接,要考虑门之间连接的可靠性和支撑功能,而且必须保证开关操作的便利性,降低开关难度,提高作业效率;密封防水性能通常通过门胶条实现,侧门的上端通过设置雨檐增强防水性能。

For the connection of multiple doors, it is necessary to consider the reliability and support function of the connection between doors, and ensure the convenience of switch operation, reduce the difficulty of switching, and improve work efficiency; The sealing and waterproofing performance is usually achieved through door adhesive strips, and the upper end of the side door is enhanced by setting rain eaves to enhance the waterproofing performance.

多联门箱主要用于公路运输,侧门可完全打开,这种设计便于货物从侧面进出箱体,还可使用叉车直接装卸货物,减少叉车运输过程中对箱体的损坏。多联门应考虑边门对中门的支撑作用,特别是单边三联门,必须考虑三扇门内部强度的递减或递增,保证靠边的门具有足够的强度支撑其他门的关联。

Multiple door boxes are mainly used for road transportation, with side doors that can be fully opened. This design facilitates the entry and exit of goods from the side of the box. Forklifts can also be used to directly load and unload goods, reducing damage to the box during forklift transportation. Multiple doors should consider the supporting effect of the side door on the center door, especially for single side triple doors. It is necessary to consider the decreasing or increasing internal strength of the three doors to ensure that the side door has sufficient strength to support the association of other doors.

轻质多联门受重量限制,通常在箱内顶增加轨道支撑,与内门板连接,减少门开后的下垂问题。

Lightweight multi link doors are limited by weight, and usually add track support on the top of the box to connect with the inner door panel, reducing the problem of sagging after opening the door.

本文由 济南集装箱厂家友情奉献.更多有关的知识请点击 //www.batheeees.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from Jinan container manufacturers. For more relevant knowledge, please click //www.batheeees.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned